Asus P4T-M Specifications download pdf (Page 11)

ASUS P4T-M Quick Setup Manual 11

2. HARDWARE SETUP

Step 5: Install the Heatsink Retaining Clips

Latch one end of the heatsink

retaining clip to one of the tabs

on the heatsink support base.

Latch the large slotted tab

on the clip to the protrud-

ing tab on the side of the

heatsink support base.

Push down on the

other end of the

heatsink retaining

clip until it locks

into place.

WARNING! Be sure that there is sufficient air circulation across the processor’s

heatsink by regularly checking that your CPU fan is working. Without sufficient

circulation, the processor could overheat and damage both the processor and the

motherboard. You may install an auxiliary fan, if necessary.

NOTE: Do not forget to set the correct Bus Frequency and Multiple (frequency

multiple setting is available only on unlocked processors) for your Socket 423 pro-

cessor or else boot-up may not be possible. Socket 423 processors provide internal

thermal sensing so that a socket mounted thermal resistor is not needed.

1 ... 10 11 12 13 14 15 16 17 18 19

No comments

Asus P4T-M Specifications Page 11