Asus PCI-L101 User Manual download pdf (Page 70)

ASUS P3V133 User’s Manual70

4. BIOS SETUP

Plug & Play O/S [No]

This field allows you to use a Plug-and-Play (PnP) operating system to con-

figure the PCI bus slots instead of using the BIOS. When [Yes] is selected,

interrupts may be reassigned by the OS. When a non-PnP OS is installed or

you want to prevent reassigning of interrupt settings, select the default set-

ting of [No]. Configuration options: [No] [Yes]

Reset Configuration Data [No]

The Extended System Configuration Data (ESCD) contain information about

non-PnP devices. It can also hold the complete record of how the system

was configured the last time it was booted. Select [Yes] only if you want to

clear these data during the Power-On Self Test (POST). Configuration op-

tions: [No] [Yes]

Boot Virus Detection [Enabled]

This field allows you to set boot virus detection, ensuring a virus-free boot

sector. The system halts and displays a warning message when it detects a

virus. If this occurs, you can either allow the operation to continue or use a

virus-free bootable floppy disk to restart and investigate your system. Con-

figuration options: [Disabled] [Enabled]

Quick Power On Self Test [Enabled]

This feature enables you to speed up the bootup by skipping some POST routines such

as memory checking.

Configuration options: [Disabled] [Enabled]

Boot Up Floppy Seek [Enabled]

When enabled, the BIOS will seek the floppy disk drive to determine whether

the drive has 40 or 80 tracks. Floppy drives with 1.44MB have 80 tracks.

You may leave the default [Disabled] to save time if you are using 1.44MB

floppy drives. Configuration options: [Disabled] [Enabled]

Boot Up NumLock Status [On]

This field enables users to activate the Number Lock function upon system

boot. Configuration options: [Off] [On]

Full Screen Logo [Enabled]

Configuration options: [Disabled] [Enabled]

Boot Menu

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 95 96

No comments

Asus PCI-L101 User Manual Page 70