Asus Internet Security Router User Manual download pdf (Page 3)

APPLICATION NOTES – CREATING AN IKE IPSEC TUNNEL BETWEEN AN INTERNET SECURITY ROUTER AND A WINDOWS 2000/XP PC

2.2 Configure the IP Address of the Internet Security Router

You need to login as admin in order to configure the settings for the Internet Security Router.

2.2.1 Configure the WAN Port

Click on the “WAN” menu and then click on the “WAN” submenu to access WAN Configuration page. Make sure

the settings for IP address, subnet mask and the gateway address are set exactly as shown in Figure 2.4. You

may ignore the settings for the primary and secondary DNS settings.

Figure 2.4. Configure WAN Port for the Internet Security Router

2.2.2 Configure the LAN Port

Click on the “LAN” menu and then click on the “IP” submenu to access LAN Configuration page. Make sure the

settings for IP address, and subnet mask are set exactly as shown in Figure 2.5.

Figure 2.5. Configure LAN Port for the Internet Security Router

2.2.3 Verify the Routing Table in the Internet Security Router

Click on the “Routing” menu to access Routing Configuration page. Make sure that a default route is exactly the

same as what is shown in Figure 2.6. Default route is indicated by “0.0.0.0” for both the destination IP and the

destination netmask.

1 2 3 4 ... 38

No comments

Asus Internet Security Router User Manual Page 3