Asus Power Station II V2.0 Specifications download pdf (Page 88)

3-18 Chapter 3: BIOS setup

3.4.2 CPU Ratio Setting [Auto]

Allows you to adjust the ratio between CPU Core Clock and BCLK Frequency. Use

the <+> and <-> keys to adjust the value.

Conguration options: [Auto] [12.0] [13.0] [14.0] [15.0] [16.0] [17.0] [18.0] [19.0]

[20.0]

3.4.3 Intel(R) SpeedStep(TM) Tech [Enabled]

When set to [Disabled], the CPU runs at its default speed. When set to [Enabled],

the CPU speed is controlled by the operating system.

Conguration options: [Disabled] [Enabled]

3.4.4 Intel(R) Turbo Mode Tech [Enabled]

Turbo mode allows processor cores to run faster than marked frequency in specic

condition.

Conguration options: [Disabled] [Enabled]

The following two items appear only when you set the Ai Overclock Tuner item

to [Manual], [D.O.C.P.] or [X.M.P.].

BCLK Frequency [XXX]

Allows you to adjust the Internal Base Clock (BCLK). Use the <+> and <-> keys to

adjust the value. You can also type the desired value using the numeric keypad.

The values range from 100 to 500.

DRAM O.C. Profile [DDR3-1339MHz]

This item appears only when you set the Ai Overclock Tuner item to

[D.O.C.P.] and allows you to select a DRAM O.C. prole, which applies

different settings to DRAM frequency, DRAM timing and DRAM voltage.

Conguration options: [DDR3-1339MHz] [DDR3-1603MHz]

eXtreme Memory Profile [High Performance]

This item appears only when you set the Ai Overclock Tuner item to [X.M.P.]

and allows you to select the X.M.P. mode supported by your memory module.

Conguration options: [High Performance] [High Frequency]

The conguration options for the following sub-item vary depending on the

DIMMs you install on the motherboard.

To obtain the best performance of the X.M.P. DIMM or 1600MHz DIMM, install

only one DIMM on each memory channel.

1 ... 87 88 89 ... 182

No comments

Asus Power Station II V2.0 Specifications Page 88