Asus DSL-N66U User's Guide download pdf (Page 44)

Firmware Restoration

Firmware Restoration is used on an ASUS Wireless Router after a

failed ﬁrmware upgrade. This utility uploads a ﬁrmware ﬁle to the

wireless router. The process takes about three to four minutes.

TolaunchrescuemodeandusetheFirmwareRestoration

utility:

1. Unplug the wireless router from its power source.

2. While holding down the Reset button at the back of the

wireless router, plug the wireless router into a power source.

Release the Reset button when the Power LED at the front

panel begins to ﬂash slowly, which indicates that the wireless

router is in rescue mode.

3. Use the following to set up your TCP/IP settings:

IP address: 192.168.1.x

Subnet mask: 255.255.255.0

Launch rescue mode before using the Firmware Restoration

utility.

The Firmware Restoration utility is not used to upgrade the

ﬁrmware of a working ASUS Wireless Router. Normal ﬁrmware

upgrades must be done through the web GUI. Refer to

Upgrading the ﬁrmware for more details.

5. Click Browse to navigate to the ﬁrmware ﬁle, then click Upload.

4. From your computer’s desktop, click

Start > All Programs > ASUS Utility > DSL-N66U Wireless

Router > Firmware Restoration.

1 ... 43 44 45 ... 70

No comments

Asus DSL-N66U User's Guide Page 44