Asus RT-AC52U User Manual download pdf (Page 30)

4. On the user-dened QoS rules page, there are four default

online service types – web surf, HTTPS and le transfers.

Select your preferred service, ll in the Source IP or MAC,

Destination Port, Protocol, Transferred and Priority, then

click Apply. The information will be congured in the QoS rules

screen.

NOTES

• To ll in the source IP or MAC, you can:

a) Enter a specic IP address, such as "192.168.122.1".

b) Enter IP addresses within one subnet or within the same IP

pool, such as “192.168.123.*”, or “192.168.*.*”

c) Enter all IP addresses as “*.*.*.*” or leave the eld blank.

d) The format for the MAC address is six groups of two

hexadecimal digits, separated by colons (:), in transmission

order (e.g. 12:34:56:aa:bc:ef)

• For source or destination port range, you can either:

a) Enter a specic port, such as “95”.

b) Enter ports within a range, such as “103:315”, “>100”, or

“<65535”.

• The Transferred column contains information about the upstream

and downstream trac (outgoing and incoming network trac) for

one section. In this column, you can set the network trac limit (in

KB) for a specic service to generate specic priorities for the service

assigned to a specic port. For example, if two network clients, PC

1 and PC 2, are both accessing the Internet (set at port 80), but PC 1

exceeds the network trac limit due to some downloading tasks, PC

1 will have a lower priority. If you do not want to set the trac limit,

leave it blank.

1 ... 29 30 31 ... 130

No comments

Asus RT-AC52U User Manual Page 30