Asus P8B75-M User Manual download pdf (Page 66)

2-20

Chapter 2: Getting started

Intel

Rapid Start Technology [Disabled]

Allow you to enable or disable Intel

Rapid Start Technology.

Conguration options: [Enabled] [Disabled]

The following items appear only when you set the Intel

Rapid Start Technology to

[Enabled].

Entry on S3 RTC Wake [Enabled]

The system automatically wakes up and set to Rapid Start Technology S4 mode.

Conguration options: [Enabled] [Disabled

Entry After [Immediately]

Allows you to set the wake-up time.

Conguration options: [Immediately] [1 minute] [2 minutes] [5 minutes] [10 minutes]

[15 minutes] [30 minutes] [1 hour] [2 hours]

Active Page Threshold Support [Enabled]

The system automatically set itself to sleep when the partition size is not enough for

Rapid Start Technology to work. Conguration options: [Enabled] [Disabled]

Active Memory Threshold [0]

Key in the value for the additional partition size for Rapid Start Technology to work.

Ensure that the caching partition size is larger than the total memory size.

2.5.3 SATA Conguration

While entering Setup, the BIOS automatically detects the presence of SATA devices. The

SATA Port items show Not Present if no SATA device is installed to the corresponding SATA

port.

SATA Mode Selection [IDE]

Allows you to set the SATA conguration.

[IDE] Set to [IDE] when you want to use the Serial ATA hard disk drives as

Parallel ATA physical storage devices.

[AHCI] Set to [AHCI] when you want the SATA hard disk drives to use the AHCI

(Advanced Host Controller Interface). The AHCI allows the onboard storage

driver to enable advanced Serial ATA features that increases storage

performance on random workloads by allowing the drive to internally

optimize the order of commands.

Intel

Smart Connect Technology [Disabled]

ICST Configuration [Disabled]

Allows you to enable or disable the ISCT conguration. Conguration options: [Enabled]

[Disabled]

1 ... 65 66 67 ... 82

No comments

Asus P8B75-M User Manual Page 66