Asus A7V333 User's Guide download pdf (Page 53)

2-24

Chapter 2: BIOS Information

2.6 Boot Menu

Boot Sequence

The Boot menu allows you to select four types of boot devices using the up and down

arrow keys. By using the <+> or <Space> key, you can promote devices and by using

the <-> key, you can demote devices. Promotion or demotion of devices alters the

priority which the system uses to boot the system. Configuration fields include

Removable Devices, IDE Hard Drive, ATAPI CD-ROM & Other Boot Device.

Removable Device [Legacy Floppy]

Configuration options: [Disabled] [Legacy Floppy] [LS-120] [ZIP] [ATAPIMO]

IDE Hard Drive

This field allows you to select which IDE hard disk drive to use in the boot

sequence. Pressing [Enter] shows the product IDs of all connected IDE drives.

ATAPI CD-ROM

This field allows you to select which ATAPI CD-ROM drive to use in the boot

sequence. Pressing [Enter] will show the product IDs of all your connected ATAPI

CD-ROM drives.

Other Boot Device [INT18 Device (Network)]

Configuration options: [Disabled] [SCSI Boot Device] [INT18 Device (Network)]

Plug & Play O/S [No]

This field allows you to use a Plug-and-Play (PnP) operating system to configure

the PCI bus slots instead of using the BIOS. When [Yes] is selected, interrupts may

be reassigned by the OS. If you installed a non-PnP OS or if you want to prevent

reassigning of interrupt settings, keep the default setting [No]. Configuration

options: [No] [Yes]

Reset Configuration Data [No]

The Extended System Configuration Data (ESCD) contain information about non-

PnP devices. It also holds the complete record of how the system was configured

the last time it was booted. Select [Yes] if you want to clear these data during the

Power-On-Self-Test (POST). Configuration options: [No] [Yes]

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 63 64

No comments

Asus A7V333 User's Guide Page 53