2-38
Chapter 2: Getting started
2.7.5 CPU Q-Fan Control [Auto]
[Auto] Enables the CPU Q-Fan control for 4-pin CPU fan.
[Disabled] Disables the CPU Q-Fan control feature.
[PWM Mode] Enable the CPU Q-Fan control in PWM mode for 4-pin CPU fan.
[DC Mode] Enable the CPU Q-Fan control in DC mode for 3-pin CPU fan.
CPU Fan Speed Low Limit [300 RPM]
This item appears only when you enable the CPU Q-Fan Control feature and allows you to
disable or set the CPU fan warning speed. Conguration options: [Ignore] [200RPM] [300
RPM] [400 RPM] [500 RPM] [600 RPM]
CPU Fan Profile [Standard]
This item appears only when you enable the CPU Q-Fan Control feature and allows you to
set the appropriate performance level of the CPU fan.
[Standard] Sets to [Standard] to make the CPU fan automatically adjust depending on
the CPU temperature.
[Silent] Sets to [Silent] to minimize the fan speed for quiet CPU fan operation.
[Turbo] Sets to [Turbo] to achieve maximum CPU fan speed.
[Manual] Sets to [Manual] to assign detailed fan speed control parameters.
The following four items appear only when you set CPU Fan Prole to [Manual].
CPU Upper Temperature [70]
Use the <+> or <-> keys to adjust the upper limit of the CPU temperature. The values
range from 25°C to 75°C.
CPU Fan Max. Duty Cycle(%) [100]
Use the <+> or <-> keys to adjust the maximum CPU fan duty cycle. The values range
from 20% to 100%. When the CPU temperature reaches the upper limit, the CPU fan
operates at the maximum duty cycle.
CPU Middle Temperature [45]
Use the <+> or <-> keys to set the value for CPU Middle Temperature. The range of
the values depends on the CPU installed.
CPU Fan Middle Duty Cycle(%) [60]
Use the <+> or <-> keys to adjust the CPU fan middle duty cycle. The values range
from 20% to 100%. When the CPU temperature reaches the middle value, the CPU fan
operates at the middle duty cycle.
CPU Lower Temperature [40]
Use the <+> or <-> keys to adjust the CPU fan’s lower temperature. The values range
from 20% to 75%.
E9495_H97-PRO_GAMER_Guide.indb 38 2014/6/20 16:06:03
Comments to this Manuals