1. PS/2 mouse port (green). This port is for a PS/2 mouse.
2. Parallel port.
This 25-pin port connects a parallel printer, a scanner, or other devices.
3. LAN (RJ-45) port.
This port allows Gigabit connection to a Local Area Network (LAN)
through a network hub.
LAN port LED indications
3. Keyboard and USB device wake-up (KB_USBPWB)
This jumper allows you to enable or disable the keyboard and rear USB ports wake-
up feature. When you set this jumper to pins 2-3 (+5VSB), you can wake up the
computer by pressing a key on the USB keyboard or using a USB device. This feature
requires an ATX power supply that can supply at least 1A on the +5VSB lead, and a
corresponding setting in the BIOS.
Activity/Link LED Speed LED
Status Description Status Description
Off No link OFF 10Mbps connection
Orange Linked ORANGE 100Mbps
connection
Orange (Blinking) Data activity GREEN 1Gbps connection
Orange (Blinking
then steady)
Ready to wake
up from S5 mode
Comments to this Manuals