Asus P5SD2-FM User Manual download pdf (Page 19)

ASUS P5SD2-FM 1-9

Notes on Intel

Hyper-Threading Technology

• This motherboard supports Intel

Pentium

4 CPUs in the 775-land package

with Hyper-Threading Technology.

• Hyper-Threading Technology is supported under Windows

XP and Linux

2.4.x (kernel) and later versions only. Under Linux, use the Hyper-Threading

compiler to compile the code. If you are using any other operating systems,

disable the Hyper-Threading Technology item in the BIOS to ensure system

stability and performance.

• Installing Windows

XP Service Pack 1 or later version is recommended.

• Make sure to enable the Hyper-Threading Technology item in BIOS before

installing a supported operating system.

• For more information on Hyper-Threading Technology, visit www.intel.com/

info/hyperthreading.

To use the Hyper-Threading Technology on this motherboard:

1. Install an Intel

Pentium

4 CPU that supports Hyper-Threading Technology.

2. Power up the system and enter the BIOS Setup (see Chapter 2: BIOS setup).

Under the Advanced Menu, make sure that the item Hyper-Threading

Technology is set to Enabled. The item appears only if you installed a CPU

that supports Hyper-Threading Technology.

3. Reboot the computer.

The CPU fits in only one correct orientation. DO NOT force the CPU into the

socket to prevent bending the connectors on the socket and damaging the CPU!

6. Close the load plate (A), then push

the load lever (B) until it snaps into

the retention tab.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 67 68

No comments

Asus P5SD2-FM User Manual Page 19