Asus ASMB7-iKVM User's Guide download pdf (Page 54)

ASUS RS300-H8-PS12

4-5

1. Clear RTC RAM (3-pin CLRTC1)

This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can clear

the CMOS memory of date, time, and system setup parameters by erasing the CMOS

RTC RAM data. The onboard button cell battery powers the RAM data in CMOS, which

include system setup information such as system passwords.

To erase the RTC RAM:

1. Turn OFF the computer and unplug the power cord.

2. Move the jumper cap from pins 1–2 (default) to pins 2–3. Keep the cap on pins

2–3 for about 5–10 seconds, then move the cap back to pins 1–2.

3. Plug the power cord and turn ON the computer.

4. Hold down the <Del> key during the boot process and enter BIOS setup to re-enter

data.

Except when clearing the RTC RAM, never remove the cap on CLRTC jumper default position.

Removing the cap will cause system boot failure!

If the steps above do not help, remove the onboard battery and move the jumper again to clear

the CMOS RTC RAM data. After the CMOS clearance, reinstall the battery.

4.2 Jumpers

1 ... 53 54 55 ... 193

No comments

Asus ASMB7-iKVM User's Guide Page 54