ASUS P9D-M Series
2-37
10. 4-pin power connector (4-pin PWR3)
This 4-pin connector is for 5V power for compatible SATA DOM (Disk on Module)
devices connected using the appropriate cable. You can also use this 4-pin
connector to connect to the PSU to enhance power by 12V.
11. ATX power connectors (24-pin EATXPWR1, 8-pin EATX12V1)
These connectors are for the ATX power supply plugs. The power supply plugs
are designed to t these connectors in only one orientation. Find the proper
orientation and push down rmly until the connectors completely t.
• DO NOT forget to connect the 24-pin, the 8-pin power plugs, and the 4-pin PWR3;
otherwise, the system will not boot up.
• Use of a power supply unit (PSU) with a higher power output is recommended when
conguring a system with more power-consuming devices. The system may become
unstable or may not boot up if the power is inadequate.
• This motherboard supports ATX2.0 PSU or later versions.
• Ensure that your PSU can provide at least the minimum power required by your
system.
Comments to this Manuals