Asus Terminator 2 Barebone System T2-P User Manual download pdf (Page 31)

ASUS Terminator 2 barebone system

2.6.2 DIMM installation

To install a DDR DIMM.

1. Locate the two DIMM sockets

on the motherboard.

2. Unlock a socket by pressing

the retaining clips outward.

3. Align a DIMM on the socket

such that the notch on the

DIMM matches the break on

the socket.

4. Firmly insert the DIMM into

the socket until the retaining

clips snap back in place and

the DIMM is properly seated.

CPU FSB DDR DIMM Type Memory Frequency

800 MHz PC3200/PC2700*/PC2100 400/333*/266 MHz

533 MHz PC2700/PC2100 333/266 MHz

400 MHz PC2100 266 MHz

Table 2: Memory frequency/CPU FSB synchronization

The system motherboard supports different memory frequencies

depending on the CPU FSB (Front Side Bus) and the type of DDR DIMM.

Retaining clips

A DDR DIMM is keyed with a notch so that it fits in only one direction.

DO NOT force a DIMM into a socket to avoid damaging the DIMM!

*When using 800MHz CPU FSB, PC2700 DDR DIMMs may run only at

320MHz (not 333MHz) due to chipset limitation.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 129 130

No comments

Asus Terminator 2 Barebone System T2-P User Manual Page 31