Asus Terminator 2 Barebone System T2-P User Manual download pdf (Page 56)

Chapter 3: Starting up

To enable ASUS Instant Music:

1. Connect the analog audio cable from the optical drive to the 4-pin CD

connector on the motherboard. See section “4.4 Connectors” for the

location of the CD connector.

3.4.3 ASUS Instant Music

The motherboard is equipped with a BIOS-based audio playback feature

called Instant Music. This feature is supported by the onboard audio

AC’97 CODEC, and requires an optical drive (CD-ROM, DVD-ROM,

CD-RW, or DVD-RW).

2. Turn on the system and enter BIOS by pressing the Delete key

during the Power On Self-Tests (POST).

3. In the Instant Music Configuration menu, select the item Instant

Music and set it to Enabled. See section 5.4.6 “Instant Music

Configuration.”

4. The Instant Music CD-ROM Drive item appears if you enabled

Instant Music. Highlight the item then press Enter to display the

CD-ROM options.

5. Save your changes and exit BIOS Setup.

Make sure to connect the optical drive audio cable. Otherwise, you

cannot control the audio volume using the Instant Music function keys.

• The Scroll Lock LED is fixed to ON after enabling Instant Music.

• The Caps Lock LED turns ON when you pause the CD playback.

• When set to Instant Music mode, the system wake-up features

(LAN, keyboard, mouse, USB) are deactivated. In this case, power

up the system using the power switch.

• If the system lost connection or did not detect any optical drive, the

Instant Music feature turns OFF (disabled) automatically. A “beep”

indicates this condition.

• Instant Music only supports CDs in audio format.

• Instant Music does not work if you installed and enabled an add-on

sound card.

• Instant Music only supports PS/2 keyboard.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 129 130

No comments

Asus Terminator 2 Barebone System T2-P User Manual Page 56