Asus V2-AH2 User Manual download pdf (Page 8)

8 Quick installation guide

English

4. For SATA HDD: Connect the

SATA signal and power plugs to

the connectors at the back of

the drive.

For IDE HDD: Connect the IDE

signal and power plugs to the

connectors at the back of the drive.

SATA IDE

Removing the bay covers and reinstalling the

front panel assembly and side cover

If you installed an optical and/or oppy disk drive, remove the bay cover(s)

on the front panel assembly before reinstalling it to the chassis. To do this:

1. Locate the bay cover locks.

2. Press the locks outward to

release the bay cover.

3. Push the bay cover inward, then

set it aside.

4. Follow the same instructions to

remove the 3.5” drive bay cover.

To reinstall the front panel assembly and side cover:

1. Insert the front panel assembly hinge-like tabs to the holes on the

right side of the chassis.

2. Swing the front panel assembly to the left, then insert the hooks to

the chassis until the front panel assembly ts in place.

3. Insert the side cover hooks to the chassis top and bottom holes.

4. Push the side cover to the direction of the front panel until it ts in place.

5. Secure the cover with two screws you removed earlier.

Air duct

Chassis tab holes

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 55 56

No comments

Asus V2-AH2 User Manual Page 8