Asus A7V8X-X User Manual download pdf (Page 42)

2-12

Chapter 2: BIOS Information

2.3.1 Primary and Secondary Master/Slave

Type [Auto]

Select [Auto] to automatically detect an IDE hard disk drive. If automatic detection

is successful, Setup automatically fills in the correct values for the remaining fields

on this sub-menu. If automatic detection fails, select [User Type HDD] to manually

enter the IDE hard disk drive parameters. Refer to the next section for details.

[User Type HDD]

Manually enter the number of cylinders, heads and sectors per track for the drive.

Refer to the drive documentation or label for this information.

Before attempting to configure a hard disk drive, make sure you have the correct

configuration information supplied by the drive manufacturer.

Halt On [All Errors]

This field specifies the types of errors that will cause the system to halt.

Configuration options: [All Errors] [No Error] [All but Keyboard] [All but Disk] [All but

Disk/Keyboard]

Installed Memory [XXX MB]

This field automatically displays the amount of conventional memory detected by

the system during the boot process.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 63 64

No comments

Asus A7V8X-X User Manual Page 42