Asus WL-106gM User Manual download pdf (Page 12)

ASUS WLAN Card 11

English

Quick Start Guide

Status - IP Cong

IP Cong tab shows all the current host

and WLAN Card information including

host name, DNS servers, IP address,

subnet mask and default gateway.

Button

IP Release

- If you want to remove the

current IP address, click this button

to release the IP address from DHCP

server.

IP Renew

- If you want to obtain a new IP address from DHCP server, click this

button to renew the IP address.

Ping

- Click this button to open “Ping” tab which is used to ping the devices in

your network.

NOTE: The IP Release and IP Renew buttons can only be used on the

WLAN Card which gets IP address from DHCP server.

Status - Ping

Click the "Ping" button in Status-IP

Cong tab to open this page. The Ping

tab allows you to verify the accessibility

of other computers or network devices.

To ping a connection:

1. Type the IP address of the device you

want to verify in the IP Address eld.

2. Congure the ping session by assigning

the ping packet size and number of

packet to send, and the timeout value (in milliseconds).

3. Click the “Ping” button.

During the ping session, the Ping button toggles into a Stop button. To cancel

the ping session, click the “Stop” button.

The session eld displays information on the veried connection including the

roundtrip time (minimum, maximum, and average) and packets sent, received,

and lost after a ping session.

Click the “Clear” button to clear the session eld.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 105 106

No comments

Asus WL-106gM User Manual Page 12