Asus L1A User Manual download pdf (Page 47)

Using the Notebook PC

Inserting a PC Card (PCMCIA)

1. Insert the PC card with the connector side

first. When the PC card is fully inserted, the

PC card bay door can close normally with-

out striking the PC card.

2. Carefully connect any cables or adapters

needed by the PC card. Usually connectors

can only be inserted in one orientation. Look

for a sticker, icon, or marking on one side of

the connector representing the top side.

1. Press in the toggle eject button and release. The

recessed spring loaded toggle button will ex-

tend when pushed in and released.

Removing a PC Card (PCMCIA)

When PC cards are inserted and running, they draw power from the Notebook PC even when they are

not in use. You must stop the PC card service to turn the PC card OFF.

CAUTION! Stopping the PC card service is necessary before removing a PC card.

To remove the PC card, first remove all cables or adapters attached to the PC card, then double-click the

PC card icon on the taskbar and stop the PC card you want to remove.

2. Press the extended button again to eject the

PC Card. Carefully pull the ejected PC card

out of the socket.

Be sure the PC card is

level when inserting.

INSERT THIS END

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 89 90

No comments

Asus L1A User Manual Page 47