Asus H81M2 User Manual download pdf (Page 16)

1-8

Chapter 1: Product introduction

• The default memory operation frequency is dependent on its Serial Presence Detect

(SPD), which is the standard way of accessing information from a memory module.

Under the default state, some memory modules for overclocking may operate at a

lower frequency than the vendor-marked value. To operate at the vendor-marked

or at a higher frequency, refer to section 2.5 Ai Tweaker menu for manual memory

frequency adjustment.

• For system stability, use a more efcient memory cooling system to support a full

memory load (2 DIMMs) or overclocking condition.

• Visit the ASUS website at:

www.asus.com for the latest QVL.

1.4.3 Installing a DIMM

Unplug the power supply before adding or removing DIMMs or other system components.

Failure to do so can cause severe damage to both the motherboard and the components.

1. Press the retaining clips

outward to unlock a DIMM

socket.

2. Align a DIMM on the socket

such that the notch on the

DIMM matches the DIMM

slot key on the socket.

A DIMM is keyed with a notch so that it ts in only one direction. DO NOT force a DIMM into

a socket in the wrong direction to avoid damaging the DIMM.

3. Firmly insert the DIMM into the

socket until the retaining clips snap

back in place and the DIMM is

properly seated.

1.4.4 Removing a DIMM

To remove a DIMM:

1. Simultaneously press the retaining clips outward to unlock the DIMM.

Unlocked retaining clip

DIMM notch

DIMM slot key

Locked Retaining Clip

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 74 75

No comments

Asus H81M2 User Manual Page 16