Asus P5Q3 User Manual download pdf (Page 79)

ASUS P5Q3 3-13

DMA Mode [Auto]

Selects the DMA mode.

Conguration options: [Auto] [SWDMA0] [SWDMA1] [SWDMA2] [MWDMA0]

[MWDMA1] [MWDMA2] [UDMA0] [UDMA1] [UDMA2] [UDMA3] [UDMA4] [UDMA5]

SMART Monitoring [Auto]

Sets the Smart Monitoring, Analysis, and Reporting Technology.

Conguration options: [Auto] [Disabled] [Enabled]

32Bit Data Transfer [Enabled]

Enables or disables 32-bit data transfer.

Conguration options: [Disabled] [Enabled]

3.3.6 Storage Conguration

The items in this menu allow you to set or change the congurations for the SATA

devices installed in the system. Select an item then press <Enter> if you want to

congure the item.

Storage Conguration

SATA Conguraton [Enhanced]

Congure SATA as [IDE]

Hard Disk Write Protect [Disabled]

IDE Detect Time Out (Sec) [35]

Options

Disabled

Compatible

Enhanced

BIOS SETUP UTILITY

Main

SATA Conguration [Enhanced]

Conguration options: [Disabled] [Compatible] [Enhanced]

Configure SATA as [IDE]

Sets the conguration for the Serial ATA connectors supported by the

Southbridge chip. Conguration options: [IDE] [RAID] [AHCI]

• If you want to use the Serial ATA hard disk drives as Parallel ATA physical

storage devices, keep the default setting [IDE].

• If you want the Serial ATA hard disk drives to use the Advanced Host

Controller Interface (AHCI), set this item to [AHCI]. The AHCI allows

the onboard storage driver to enable advanced Serial ATA features that

increases storage performance on random workloads by allowing the drive

to internally optimize the order of commands.

• If you want to create a RAID 0, RAID 1, RAID 5, RAID 10, or the Intel

Matrix Storage Technology conguration from the Serial ATA hard disk

drives, set this item to [RAID].

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 171 172

No comments

Asus P5Q3 User Manual Page 79