Asus P5QL SE User Manual download pdf (Page 28)

1-18 Chapter 1: Product introduction

Except when clearing the RTC RAM, never remove the cap on CLRTC jumper default

position. Removing the cap will cause system boot failure!

• If the steps above do not help, remove the onboard battery and move the jumper again

to clear the CMOS RTC RAM data. After the CMOS clearance, reinstall the battery.

• You do not need to clear the RTC when the system hangs due to overclocking. For

system failure due to overclocking, use the CPU Parameter Recall (C.P.R.) feature. Shut

down and reboot the system, then the BIOS automatically resets parameter settings to

default values.

• Due to the chipset limitation, AC power off is required before you use the C.P.R.

function. You must turn off and on the power supply or unplug and plug the power cord

before rebooting the system.

P5QL SE

P5QL SE Clear RTC RAM

1 2 2 3

Normal

(Default)

Clear RTC

CLRTC

1.10 Connectors

1.10.1 Rear panel connectors

4 53

68 7

1. PS/2 keyboard port (purple). This port is for a PS/2 keyboard.

2. Parallel port.

This 25-pin port connects a parallel printer, a scanner, or other devices.

3. LAN (RJ-45) port.

Supported by Gigabit LAN controller, this port allows Gigabit

connection to a Local Area Network (LAN) through a network hub.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 59 60

No comments

Asus P5QL SE User Manual Page 28