Asus SABERTOOTH 990FX R2.0 User Manual download pdf (Page 156)

5-2

Chapter 5: RAID congurations

Chapter 5

5.1.2 Installing Serial ATA hard disks

The motherboard supports Serial ATA hard disk drives. For optimal performance, install

identical drives of the same model and capacity when creating a disk array.

To install the SATA hard disks for a RAID conguration:

1. Install the SATA hard disks into the drive bays.

2. Connect the SATA signal cables.

3. Connect a SATA power cable to the power connector on each drive.

5.1.3 Setting the RAID item in BIOS

You must enable the RAID function in the BIOS Setup before creating RAID sets using SATA

HDDs. To do this:

1. Enter the BIOS Setup during POST.

2. Go to the

Advanced menu > SATA Conguration, and then press <Enter>.

3. Set the SATA Mode item to [RAID Mode].

4. Save your changes, and then exit the BIOS Setup.

Refer to Chapter 3 for details on entering and navigating through the BIOS Setup

Due to chipset limitation, when SATA ports are set to RAID mode, all SATA ports run at

RAID mode together.

1 2 ... 151 152 153 154 155 156 157 158 159 160 161 ... 179 180

No comments

Asus SABERTOOTH 990FX R2.0 User Manual Page 156