Asus CUW-FX User Manual download pdf (Page 39)

3. HARDWARE SETUP

Connectors

3. H/W SETUP

ASUS CUW(E)-FX User’s Manual

25) ATX Power Supply Connector (20-pin block ATXPWR)

This connector connects to an ATX power supply. The plug from the power sup-

ply will only insert in one orientation because of the different hole sizes. Find the

proper orientation and push down firmly making sure that the pins are aligned.

IMPORTANT: Make sure that your ATX power supply can supply at least 10mA

on the +5-volt standby lead (+5VSB). You may experience difficulty in power-

ing ON your system if your power supply cannot support the load. For Wake-

On-LAN support, your ATX power supply must supply at least 720mA +5VSB.

CUW(E)-FX

CUW(E)-FX ATX Power Connector

+3.3 Volts

-12.0 Volts

Ground

Power Supply On

Ground

-5.0 Volts

+5.0 Volts

Power Good

+12.0 Volts

+3.3 Volts

Ground

+5.0 Volts

Ground

+5.0 Volts

Ground

+5V Standby

26) Power Supply Thermal Sensor Connector (2-pin block JTPWR)

If you have a power supply with thermal monitoring, connect its thermal sensor

cable to this connector.

CUW(E)-FX

CUW(E)-FX Thermal Sensor Connector

JTPWR

Power Supply Thermal Sensor

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 127 128

No comments

Asus CUW-FX User Manual Page 39