Asus PCI-L101 User Manual download pdf (Page 37)

ASUS P3V133 User’s Manual 37

11. Wake-On-LAN Connector (3-pin WOL_CON)

The WOL_CON connector powers up the system when a wake-up packet or

signal is received from the network through an optional PCI-L101 LAN card.

IMPORTANT: This feature requires that the Wake-On-LAN Power Up Con-

trol is set to Enabled (see Power Management Setup under BIOS SETUP) and

that your system has an ATX power supply with at least 720mA +5V standby

power.

P3V133 Wake on LAN Connector

+5 Volt Standby

(No Connection)

Ground

WOL_CON

P3V133

12. IrDA-Compliant Infrared Module Connector (5-pin IR)

This connector supports the optional wireless transmitting and receiving infrared

module. This module mounts to a small opening on system cases that support this

feature. You must also configure the setting through “UART2 Use Infrared” in

Chipset Features Setup to select whether UART2 is directed for use with COM2

or IrDA. Use the five pins as shown on the Back View and connect a ribbon cable

from the module to the motherboard according to the pin definitions.

Front View

+5V

IRTX

IRRX

FIRRX

GND

Back View

P3V133 Infrared Module Connector

For the infrared feature to be available,

you must connect the optional Infrared

(IrDA) module to the motherboard.

+5V

IRRX

IRTX

(NC)

GND

P3V133

3. HARDWARE SETUP

Connectors

3. H/W SETUP

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 95 96

No comments

Asus PCI-L101 User Manual Page 37