Asus WL-100G User Manual download pdf (Page 34)

34 ASUS WLAN Card

Chapter 3 - Reference

Chapter 3

Windows Settings

Status - Advanced

This section allows you to set up additional parameters for the wireless router

function. We recommend that you use the default values for all items in this

window.

RTS Threshold (0-2347)

The RTS/CTS (Request to Send/Clear to Send) function is used to minimize

collisions among wireless stations. When RTS/CTS is enabled, the router

refrains from sending a data frame until another RTS/CTS handshake is

completed. Enable RTS/CTS by setting a specific packet size threshold. The

default value (2347) is recommended.

Fragmentation Threshold (256-2346)

Fragmentation is used to divide 802.11 frames into smaller pieces (fragments)

that are sent separately to the destination. Enable fragmentation by setting a

specific packet size threshold. If there is an excessive number of collisions on

the WLAN, experiment with different fragmentation values to increase the

reliability of frame transmissions. The default value (2346) is recommended

for normal use.

Preamble Mode

This parameter is used to control whether frames will transmit with the Long

or Short Preamble. The default value is Long Tx Preamble.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 56 57

No comments

Asus WL-100G User Manual Page 34