Asus P5QL-CM Specifications download pdf (Page 54)

2-14 Chapter 2: BIOS information

Take caution when changing the settings of the PCI PnP menu items. Incorrect eld values

can cause the system to malfunction.

Plug and Play O/S [No]

When set to [No], BIOS congures all the devices in the system. When set to [Yes] and if you

install a Plug and Play operating system, the operating system congures the Plug and Play

devices not required for boot. Conguration options: [No] [Yes]

The Module Version and USB Devices Enabled items show the auto-detected values. If no

USB device is detected, the item shows None.

2.4.5 USB Conguration

The items in this menu allows you to change the USB-related features. Select an item then

press <Enter> to display the conguration options.

USB Functions [Enabled]

Allows you to disable or enable the USB functions. Conguration options: [Disabled]

[Enabled]

USB 2.0 Controller [Enabled]

Allows you to enable or disable USB 2.0 controller.

Conguration options: [Enabled] [Disabled]

Legacy USB Support [Auto]

Allows you to enable or disable support for Legacy USB storage devices, including USB ash

drives and USB hard drives. Setting to [Auto] allows the system to detect the presence of

USB devices at startup. If detected, the USB controller legacy mode is enabled. If no USB

device is detected, the legacy USB support is disabled. Conguration options: [Disabled]

[Enabled] [Auto]

USB 2.0 Controller Mode [HiSpeed]

Allows you to congure the USB 2.0 controller in HiSpeed (480Mbps) or Full Speed

(12Mbps). Conguration options: [FullSpeed] [HiSpeed]

2.4.6 PCI PnP

The PCI PnP menu items allow you to change the advanced settings for PCI/PnP devices.

The menu includes setting IRQ and DMA channel resources for either PCI/PnP or legacy ISA

devices, and setting the memory size block for legacy ISA devices.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 60

No comments

Asus P5QL-CM Specifications Page 54