Asus ESC4000 G2 User Manual download pdf (Page 146)

6-26 Chapter 6: RAID conguration

6.3.1 Creating a RAID set

To create a RAID set

1. From the utility main menu, select

1. Create RAID Volume

and press

<Enter>. The following screen appears.

2. Enter a name for the RAID set and press <Enter>.

3. When the

RAID Level

item is selected, press the up/down arrow key to select

a RAID level to create, and then press <Enter>.

4. When the

Disks

item is selected, press <Enter> to select the hard disk drives

you want to include in the RAID set. The

SELECT DISKS

screen appears.

5. Use the up/down arrow key to select a drive, and then press <Space>

to select. A small triangle marks the selected drive. Press <Enter> after

completing your selection.

[ SELECT DISKS ]

Port Drive Model Serial # Size Status

0 ST3300656SS HWAS0000991753TR 279.3GB Non-RAID Disk

1 ST3300656SS 37VN00009846RAJ1 279.3GB Non-RAID Disk

2 ST3300656SS 397600009846UEDY 279.3GB Non-RAID Disk

3 ST3300656SS GWC50000991756G6 279.3GB Non-RAID Disk

Select 2 to 6 disks to use in creating the volume.

[

↑↓

]-Prev/Next [SPACE]-SelectDisk [ENTER]-Done

[ CREATE VOLUME MENU ]

[ HELP ]

Enter a unique volume name that has no special characters and is

16 characters or less.

[↑↓]Change [TAB]-Next [ESC]-Previous Menu [ENTER]-Select

Name: Volume0

RAID Level: RAID0(Stripe)

Disks: Select Disks

Strip Size: 128KB

Capacity: 0.0 GB

Create Volume

1 ... 145 146 147 ... 200

No comments

Asus ESC4000 G2 User Manual Page 146