Asus ESC4000 G2 User Manual download pdf (Page 78)

5-4 Chapter 5: BIOS setup

5.1.3 BUPDATER utility

The succeeding BIOS screens are for reference only. The actual BIOS screen

displays may not be the same as shown.

The BUPDATER utility allows you to update the BIOS le in DOS environment

using a bootable USB ash disk drive with the updated BIOS le.

UpdatingtheBIOSle

To update the BIOS le using the BUPDATER utility:

1. Visit the ASUS website at www.asus.com and download the latest BIOS le

for the motherboard. Save the BIOS le to a bootable USB ash disk drive.

2. Copy the BUPDATER utility (BUPDATER.exe) from the ASUS support

website at support.asus.com to the bootable USB ash disk drive you created

earlier.

3. Boot the system in DOS mode, then at the prompt, type:

BUPDATER /i[lename].ROM

where [lename] is the latest or the original BIOS le on the bootable USB

ash disk drive, then press <Enter>.

A:\>BUPDATER /i[le name].ROM

• This function can support devices such as a USB ash disk with FAT 32/16

format and single partition only.

• DO NOT shut down or reset the system while updating the BIOS to prevent

system boot failure!

Ensure to load the BIOS default settings to ensure system compatibility and

stability. Press <F5> and select Yes to load the BIOS default settings.

1 ... 77 78 79 ... 200

No comments

Asus ESC4000 G2 User Manual Page 78