Asus Motherboard PR-DLS533 User Manual download pdf (Page 133)

ASUS PR-DLS533 motherboard user guide

5-39

7. To activate the new kernel, you must reboot the system. At the

command prompt, type:

reboot

Press Enter.

C2. Adding a SCSI Disk Drive

NOTE: If you are not adding a SCSI or Fibre Channel disk drive to

this system, go to step 4.

1. At the command prompt, type:

mkdev hd

Press Enter.

2. The system prompts for the identifier of the host adapter that

supports this device. If the default is correct, press Enter. If the

default is not correct, type:

lsil

Press Enter.

3. The system prompts for the host adapter that supports the disk drive.

Type the correct host adapter number and press Enter.

If an additional LSI Logic host adapter is being added to the SCO

UNIX kernel, the system may prompt if you want to update the link-kit

(add another host adapter). Type y and press Enter. If you entered

the host adapter number incorrectly, type n, and press Enter. The

system then prompts for the host adapter identifier of the preceding

step.

4. With SCO OpenServer 5.0.6a, the system prompts for the bus

number of the disk drive. Since LSI Logic host adapters support one

bus per adapter, press Enter to get the default of zero, or type 0

(zero) and press Enter.

5. The system prompts for the target ID of the disk drive. Type the ID

number of the disk drive and press Enter.

6. The system prompts for the Logical Unit Number (LUN) of the disk

drive. Type the desired LUN and press Enter, or press Enter for the

default value of zero.

1 2 ... 128 129 130 131 132 133 134 135 136 137 138 ... 141 142

No comments

Asus Motherboard PR-DLS533 User Manual Page 133