Asus P1-AH1 User Manual download pdf (Page 34)

2-18

Chapter 2: Basic installation

2.9 Installing optical and storage drives

2.9.1 Optical and storage drives installation

The system supports one Ultra ATA 100/66 IDE or one Serial ATA hard disk drive.

Configure your hard disk drive as Master device before installing it in

the storage drive assembly. Refer to the HDD documentation on how

to set the drive as a Master device.

To install an IDE hard disk drive and optical drive:

1. Turn the storage drive assembly upside down with the 3.5-inch bay

on top of the 5.25-inch bay.

2. Insert the optical drive upside down to the 5.25-inch bay, then secure

it with two screws on both sides.

3. Turn the storage drive assembly, insert the hard disk drive upside

down to the 3.5-inch bay, then secure it with two screws on both

sides.

4. Connect the black plug of the IDE cable to the optical drive, then the

gray plug to the hard disk drive.

5. Connect the 4-pin power plugs to the power connectors at the back of

the drives.

6. Install the storage drive assembly to the chassis.

7. Secure the storage drive assembly with three screws.

1 ... 33 34 35 ... 94

No comments

Asus P1-AH1 User Manual Page 34