Asus P1-AH1 User Manual download pdf (Page 71)

5-11

ASUS Pundit P1-AH1

5.3.3 Primary IDE Master/Slave;

First/Second SATA Master

Primary IDE Master [Auto]

Select [Auto] to automatically detect an IDE hard disk drive. If automatic

detection is successful, Setup automatically fills in the correct values for

the remaining fields on this sub-menu. If automatic detection fails, this may

be because the hard disk drive is too old or too new. If the hard disk was

already formatted on an older system, Setup may detect incorrect

parameters. In these cases, select [Manual] to manually enter the IDE

hard disk drive parameters. Refer to the next section for details.

Configuration options: [None] [Auto] [Manual]

Before attempting to configure a hard disk drive, make sure you have

the correct configuration information supplied by the drive

manufacturer. Incorrect settings may cause the system to fail to

recognize the installed hard disk.

Primary IDE Master [Auto]

Access Mode [Auto]

Capacity XX MB

Cylinder XXXXX

Head XX

Sector XXX

PIO Mode [Auto]

UDMA Mode [Auto]

Transfer Mode UDMA5

Select Menu

Item Specific Help

Press [Enter] to

select.

IDE Primary Master

Access Mode [Auto]

This item allows the user to select the sector addressing mode.

Configuration options: [CHS] [LBA] [Large] [Auto]

PIO Mode [Auto]

This option lets you set a PIO (Programmed Input/Output) mode for the

IDE device. Modes 0 through 4 provide successive increase in

performance. Configuration options: [Auto] [Mode 0] [Mode 1] [Mode 2]

[Mode 3] [Mode 4]

1 ... 70 71 72 ... 94

No comments

Asus P1-AH1 User Manual Page 71