Asus V4-M3N8200 User Manual download pdf (Page 34)

2-16 Chapter 2: Basic installation

2.7 Installing storage drives

2.7.1 Installing an optical drive

1. Place the chassis upright, then

remove the upper 5.25” drive bay

metal plate cover.

2. Insert the optical drive to the bay, then

carefully push the drive until its screw

holes align with the holes on the bay.

3. Secure the optical drive with two

screws on both sides of the bay.

4. Connect the IDE (A) and power (B)

plugs to connectors at the back of the

drive.

2.7.2 Installing a oppy disk drive

If the system comes without a portable hard disk (optional), then you may install a

oppy disk drive into the 3.5-inch drive bay.

1. Place the chassis upright, then

remove the upper 3.5” drive bay metal

plate cover.

2. Insert the oppy disk drive to the bay,

then carefully push the drive until its

screw holes align with the holes on the

bay.

3. Secure the oppy disk drive with two

screws on both sides of the bay.

4. Connect the signal (A) and power (B)

plugs to connectors at the back of the

drive.

1 ... 33 34 35 ... 104

No comments

Asus V4-M3N8200 User Manual Page 34