Asus A7V8X User Manual download pdf (Page 82)

4-18

Chapter 4: BIOS Setup

Memory Frequency (Mhz) [Auto]

This field allows you to select a higher memory frequency for better

system performance. The options that appear in the popup menu vary

according to the CPU Frequency (MHz). Configuration options: [Auto]

[200] [266] [333] [400]

CPU VCore Setting [Auto]

The [Manual] setting allows you to manually select the core voltage

supplied to the CPU (see next item). This item can only be changed in

JumperFree mode, otherwise, it is recommended that you keep the default

setting [Auto] to allow the system to automatically determine the

appropriate CPU core voltage.

CPU VCore [1.750V]

When the CPU VCore Setting parameter above is set to [Manual], the

CPU VCore item allows you to select a specific CPU core voltage. This

field is not accessible when the CPU VCore Setting is set to [Auto].

AGP Voltage [Auto]

This item controls the AGP operating voltage. This item can only be

changed at JmpreFree mode, otherwise keep [Auto]. Configuration

options: [1.8V] [1.7V] [1.6V] [1.5V] [Auto]

System Performance [Optimal]

This field allows you to adjust the DRAM SPD timing. Set to [TURBO] is

fastest, just make sure the DRAM has the ability to support it.

Configuration options: [Optimal] [Turbo]

CPU Level 1 Cache, CPU Level 2 Cache [Enabled]

These fields allow you to choose from the default [Enabled] or choose

[Disabled] to turn on or off the CPU Level 1 and Level 2 built-in cache.

Configuration options: [Disabled] [Enabled]

PS/2 Mouse Function Control [Auto]

The default setting [Auto] allows the system to detect a PS/2 mouse at

startup. If a mouse is detected, the BIOS assigns IRQ12 to the PS/2

mouse. Otherwise, IRQ12 can be used for expansion cards. When you set

this field to [Enabled], BIOS reserves IRQ12, whether or not a PS/2 mouse

is detected at startup. Configuration options: [Enabled] [Auto]

1 ... 81 82 83 ... 132

No comments

Asus A7V8X User Manual Page 82