Asus AT3GC-I User Manual download pdf (Page 30)

2-7 ASUS AT3GC-I

2.4 Advanced menu

The Advanced menu items allow you to change the settings for the CPU and other system

devices.

Take caution when changing the settings of the Advanced menu items. Incorrect eld

values can cause the system to malfunction.

BIOS SETUP UTILITY

Main Advanced Power Boot Tools Exit

Adjust System

Frequency/Voltage etc.

Advanced Settings

USB Conguration

CPU Conguration

Chipset

Onboard Devices Conguration

PCIPnP

2.4.1 USB Conguration

The items in this menu allows you to change the USB-related features. Select an item then

press <Enter> to display the conguration options.

The Module Version and USB Devices Enabled items show the auto-detected values. If

no USB device is detected, the item shows None.

USB Functions [Enabled]

Enables or disables the USB functions. Conguration options: [Enabled] [Disabled]

Legacy USB Support [Auto]

Allows you to enable or disable support for Legacy USB storage devices, including USB ash

drives and USB hard drives. Setting to Auto allows the system to detect the presence of USB

devices at startup. If detected, the USB controller legacy mode is enabled. If no USB device

is detected, the legacy USB support is disabled. Conguration options: [Disabled] [Enabled]

[Auto]

USB 2.0 Controller [Enabled]

Enables or disables the USB 2.0 Controller. Conguration options: [Enabled] [Disabled]

USB 2.0 Controller Mode [HiSpeed]

Allows you to congure the USB 2.0 controller in HiSpeed (480 Mbps) or Full Speed

(12 Mbps). Conguration options: [FullSpeed] [HiSpeed]

The following items may only appear when a USB storage device is plugged.

USB Mass Storage Device Conguration

USB Mass Storage Reset Delay [20 Sec]

Allows you to set the maximum time that the BIOS waits for the USB storage device to

initialize. Conguration options: [10 Sec] [20 Sec] [30 Sec] [40 Sec]

1 ... 29 30 31 32 33 34 35 36 37 38

No comments

Asus AT3GC-I User Manual Page 30