Asus H61M-C User Manual download pdf (Page 48)

2-12

Chapter 2: Getting started

2.4.2 DRAM Timing Control

The sub-items in this menu allow you to set the DRAM timing control features. Use the <+>

and <-> keys to adjust the value. To restore the default setting, type [auto] using the keyboard

and press <Enter>.

Changing the values in this menu may cause the system to become unstable! If this

happens, revert to the default settings.

2.4.3 CPU Power Management

The sub-items in this menu allow you to set the CPU ratio and features.

CPU Ratio [Auto]

Allows you to manually adjust the maximum non-turbo CPU ratio. Use <+> and <-> keys or

the numeric keypad to adjust the value. The valid value ranges vary according to your CPU

model.

Enhanced Intel SpeedStep Technology [Enabled]

Allows you to enable or disable the Enhanced Intel

SpeedStep Technology (EIST).

[Disabled] Disables this function.

[Enabled] The operating system dynamically adjusts the processor voltage and

core frequency which may result in decreased average consumption and

decreased average heat production.

Turbo Mode [Enabled]

[Enabled] Allows processor cores to run faster than marked frequency in specic

conditions.

[Disabled] Disables this function.

The rst three items appear only when you set the Turbo Mode item to [Enabled].

Long Duration Power Limit [Auto]

Allows you to limit the turbo ratio’s long duration power. Use the <+> and <-> keys to adjust

the value.

Long Duration Maintained [Auto]

Allows you to maintain the turbo ratio’s long duration power. Use the <+> and <-> keys to

adjust the value.

Short Duration Power Limit [Auto]

Allows you to limit the turbo ratio’s long duration power. Use the <+> and <-> keys to adjust

the value.

Primary Plane Current Limit [Auto]

Maximum instantaneous current allowed at any given time for CPU cores. Use <+> and <->

key to adjust the value at 0.125A increment.

Secondary Plane Current Limit [Auto]

Maximum instantaneous current allowed at any given time for Internal Graphics cores.

Use <+> and <-> key to adjust the value at 0.125A increment.

1 ... 47 48 49 ... 72

No comments

Asus H61M-C User Manual Page 48