Asus P5KPL-AM IN/ROEM/SI User Manual download pdf (Page 16)

1.5 Expansion slots

In the future, you may need to install expansion cards. Refer to the technical documentation

that come with your expansion card for installation details.

Ensure to unplug the power cord before adding or removing expansion cards. Failure to do

so may cause you physical injury and damage motherboard components.

1.5.1 PCI slot

The PCI slot supports cards such as LAN cards, SCSI cards, USB cards, and other cards

that comply with the PCI specications.

1.5.2 PCI Express x1 slot

This motherboard supports PCI Express x1 network cards, SCSI cards, and other cards that

comply with the PCI Express specications.

1.6 Jumpers

1. USB device wake-up (3-pin USBPW5-8)

Set this to +5V to wake up the computer from S1 sleep mode (CPU stopped, DRAM

refreshed, system running in low power mode) using the connected USB devices. Set

to +5VSB to wake up from S3 and S4 sleep modes (no power to CPU, DRAM in slow

refresh, power supply in reduced power mode).

Visit the ASUS website at (www.asus.com) for the latest QVL.

SS - Single-sided / DS - Double - sided

DIMM support:

• A*: Supports one module inserted into any slot as Single-channel memory

conguration.

• B*: Supports one pair of modules inserted into the yellow slots as one pair of

Dual-channel memory conguration.

P5KPL-AM IN

P5KPL-AM IN USB Device Wake Up

2 3

+5V

(Default)

+5VSB

USBPW5-8

• The USB device wake-up feature requires a power supply that can provide 500mA on

the +5VSB lead for the USB port. Otherwise, the system would not power up.

• The total current consumed must NOT exceed the power supply capability (+5VSB)

whether under normal condition or in sleep mode.

1-7 ASUS P5KPL-AM IN

1 ... 15 16 17 ... 40

No comments

Asus P5KPL-AM IN/ROEM/SI User Manual Page 16