Asus CUV4X User Manual download pdf (Page 17)

ASUS CUV4X User’s Manual 17

3. HARDWARE SETUP

3.3 Hardware Setup Procedure

Before using your computer, you must complete the following steps:

1. Check Motherboard Settings

2. Install Memory Modules

3. Install the Central Processing Unit (CPU)

4. Install Expansion Cards

5. Connect Ribbon Cables, Panel Wires, and Power Supply

6. Setup the BIOS Software

3.4 Motherboard Settings

This section explains in detail how to change your motherboard’s function settings

through the use of switches and/or jumpers.

CUV4X

CUV4X Onboard LED

OFF

Standby

Power

Powered

Off

PLED

WARNING! Computer motherboards and expansion cards contain very delicate

Integrated Circuit (IC) chips. To protect them against damage from static electric-

ity, you should follow some precautions whenever you work on your computer.

1. Unplug your computer when working on the inside.

2. Use a grounded wrist strap before handling computer components. If you do

not have one, touch both of your hands to a safely grounded object or to a

metal object, such as the power supply case.

3. Hold components by the edges and try not to touch the IC chips, leads or

connectors, or other components.

4. Place components on a grounded antistatic pad or on the bag that came with

the component whenever the components are separated from the system.

5. Ensure that the ATX power supply is switched off before you plug in or

remove the ATX power connector on the motherboard.

WARNING! Make sure that you unplug your power supply when adding or re-

moving system components. Failure to do so may cause severe damage to your

motherboard, peripherals, and/or components. The onboard LED when lit acts as

a reminder that the system is in suspend or soft-off mode and not powered OFF.

1 ... 16 17 18 ... 104

No comments

Asus CUV4X User Manual Page 17