Asus CUV4X User Manual download pdf (Page 60)

ASUS CUV4X User’s Manual60

4. BIOS SETUP

Chip Configuration

SDRAM Configuration [By SPD]

This sets the optimal timings for items 2–5, depending on the memory mod-

ules that you are using. Default setting is [By SPD], which configures items

2–5 by reading the contents in the SPD (Serial Presence Detect) device. The

EEPROM on the memory module stores critical parameter information about

the module, such as memory type, size, speed, voltage interface, and mod-

ule banks. Configuration options: [User Define] [7ns (143MHz)] [8ns

(125MHz)] [By SPD]

SDRAM CAS Latency

This controls the latency between the SDRAM read command and the

time that the data actually becomes available. NOTE: This field will only

be displayed when SDRAM Configuration is set to [User Define].

SDRAM RAS Precharge Time

This controls the idle clocks after issuing a precharge command to the

SDRAM. NOTE: This field will only be displayed when SDRAM Con-

figuration is set to [User Define].

SDRAM RAS to CAS Delay

This controls the latency between the SDRAM active command and the

read/write command. NOTE: This field will only be displayed when

SDRAM Configuration is set to [User Define].

SDRAM Active to Precharge Time

To make changes to this field, the SDRAM Configuration field must be

set to [User Define].

4.4.1 Chip Configuration

(Scroll down to see more items as shown here.)

1 ... 59 60 61 ... 104

No comments

Asus CUV4X User Manual Page 60