Asus H61M-G Specifications download pdf (Page 20)

2. PS/2 and USB device wake-up (PS/2_USBPW1~4)

Set this jumper to +5V to wake up the computer from S1 sleep mode (CPU stopped,

DRAM refreshed, system running in low power mode) using the connected PS/2 or

USB devices. Set to +5VSB to wake up from S3 and S4 sleep modes (no power to

CPU, DRAM in slow refresh, power supply in reduced power mode).

H61M-G

H61M-G PS/2 and USB Device Wake-up

PS/2_USBPW1-4

2 3

+5V

(Default)

+5VSB

• The USB device wake-up feature requires a power supply that can provide 500mA on

the +5VSB lead for each USB port; otherwise, the system would not power up.

• The total current consumed must NOT exceed the power supply capability (+5VSB)

whether under normal condition or in sleep mode.

3. USB device wake-up (USBPW5~8)

This jumper allows you to enable or disable the USB device wake-up feature. When

you set this jumper to pins 2-3 (+5VSB), you can wake up the computer by pressing a

key on the USB keyboard or by clicking on the USB mouse. This feature requires an

ATX power supply that can supply at least 1A on the +5VSB lead, and a corresponding

setting in the BIOS.

H61M-G

H61M-G USB Device Wake-up

2 3

+5V

(Default)

+5VSB

USBPW5-8

Chapter 1: Product introduction

1-12

E8188_H61M_G_manual.indb 12 2/12/14 2:57:16 PM

1 ... 19 20 21 ... 64

No comments

Asus H61M-G Specifications Page 20