Asus P4T-M Specifications download pdf (Page 16)

ASUS P4T-M Quick Setup Manual

5) USB Headers (10-1 pin USB2)

If the USB Ports on the back panels are inadequate, a USB header is available

for two additional USB ports. Connect the 10-1 pin ribbon cable from the pro-

vided 2-port USB connector set to the midboard 10-1 pin USB header and mount

the USB connector set to an open slot on your chassis.

P4T-M

P4T-M USB Headers

USB2

610

1: USB Power

2: USBP2–

3: USBP2+

4: GND

5: NC

6: USB Power

7: USBP3–

8: USBP3+

9: GND

4) Wake-On-LAN Connector (3-pin WOL)

This connector connects to a LAN card with a Wake-On-LAN output, such as

the ASUS PCI-L101 Ethernet card (see 7. Appendix). The connector powers up

the system when a wakeup packet or signal is received through the LAN card.

IMPORTANT: This feature requires that Wake On LAN or PCI Modem is

enabled (see 4.5.1 Power Up Control) and that your system has an ATX power

supply with at least 720mA +5V standby power.

P4T-M

P4T-M Wake-On-LAN Connector

IMPORTANT: Requires an ATX power

supply with at least 720mA +5 volt

standby power

+5 Volt Standby

PME

Ground

WOL_CON

1 ... 15 16 17 18 19

No comments

Asus P4T-M Specifications Page 16