Asus SP98-XV User Manual download pdf (Page 16)

16 ASUS SP98-N User’s Manual

Using Your Own VGA Card on the PCI Expansion Slot

The motherboard’s BIOS will autodetect whether a VGA card is installed on the PCI

expansion slot and disable or enable the onboard VGA but most operating systems

bypasses the BIOS and installs the onboard VGA through Plug and Play. The fol-

lowing VGA Selection jumpers are not required under standard configurations but if

you experience any conflicts, follow the jumper settings below.

1. VGA Selection (VGA_SEL, VGA_SEL1)

These jumpers allow you to turn the onboard VGA on or off. BIOS has automatic

Enable/Disable onboard VGA. You need to disable the onboard VGA only if

you have conflicts within your operating system.

Disable VGA

Enable VGA

(Default)

VGA_SEL

INT_SEL

SP98-N Onboard VGA

VGA_SEL

INT_SEL

VGA_SEL1 VGA_SEL1

2. VGA Interrupt Selection (INT_SEL)

These jumpers allow you to set the VGA interrupt method. The default disables

the chipset’s internal interrupt routing. Some video capture cards may require

that the interrupt be assigned by the onboard chipset.

Interrupt by Chipset

(Video Capture Cards)

Interrupt Disabled

(Default)

VGA_SEL

INT_SEL

SP98-N Onboard VGA Interrupt

VGA_SEL

INT_SEL

3. HARDWARE SETUP

3. H/W SETUP

Motherboard Settings

1 ... 15 16 17 ... 112

No comments

Asus SP98-XV User Manual Page 16