Asus M3N WS - Motherboard - ATX Specifications download pdf (Page 57)

ASUS M3N WS

2-33

• For a fully congured system, we recommend that you use a power supply

unit (PSU) that complies with ATX 12 V Specication 2.0 (or later version)

and provides a minimum power of 600 W.

• Do not forget to connect the 4-pin ATX +12 V power plug; otherwise, the

system will not boot.

• Use of a PSU with a higher power output is recommended when

conguring a system with more power-consuming devices. The system

may become unstable or may not boot up if the power is inadequate.

• If you are uncertain about the minimum power supply requirement for your

system, refer to the Recommended Power Supply Wattage Calculator

at http://support.asus.com/PowerSupplyCalculator/PSCalculator.

aspx?SLanguage=en-us for details.

• The ATX 12 V Specication 2.0-compliant (500W) PSU has been tested

to support the motherboard power requirements with the following

conguration:

CPU: AMD FX-62

Memory 1024 MB DDR2-800 (x4)

Graphics card: PCI Express x16 NVIDIA 7900GTX

Serial ATA device: SATA hard disk drive (x2)

Optical drives: DVD-RW

9. ATX power connectors (24-pin EATXPWR; 4-pin ATX12V)

These connectors are for ATX power supply plugs. The power supply plugs

are designed to t these connectors in only one orientation. Find the proper

orientation and push down rmly until the connectors completely t.

1 ... 56 57 58 ... 162

No comments

Asus M3N WS - Motherboard - ATX Specifications Page 57