Asus M3N WS - Motherboard - ATX Specifications download pdf (Page 73)

ASUS M3N WS 3-5

3.1.3 ASUS EZ Flash 2 utility

The ASUS EZ Flash 2 feature allows you to update the BIOS without having to go

through the long process of booting from a oppy disk and using a DOS-based

utility. The EZ Flash 2 utility is built-in the BIOS chip so it is accessible by pressing

<Alt> + <F2> during the Power-On Self Tests (POST).

To update the BIOS using EZ Flash 2:

1. Visit the ASUS website (www.asus.com) to download the latest BIOS le for

the motherboard.

2. Save the BIOS le to a oppy disk or a USB ash disk, then restart the

system.

3. You can launch the EZ Flash 2 by two methods.

(1) Insert the oppy disk / USB ash disk that contains the BIOS le to the

oppy disk drive or the USB port.

Press <Alt> + <F2> during POST to display the following.

ASUSTek EZ Flash 2 BIOS ROM Utility B328

Current ROM

Update ROM

Note

[Enter] Select [S] Save [ESC] Exit

[Tab] Switch [Up/Down/Home/End] Move

FLASH TYPE: Winbond W25X80 8Mb SPI

PATH: A:\

BOARD: M3N WS

VER: 0202

DATE: 05/02/2008

BOARD: Unknown

VER: Unknown

DATE: Unknown

(2) Enter BIOS setup program. Go to the Tools menu to select EZ Flash 2

and press <Enter> to enable it.

You can switch between drives by pressing <Tab> before the correct le

is found. Then press <Enter>.

4. When the correct BIOS le is found, EZ Flash 2 performs the BIOS update

process and automatically reboots the system when done.

• This function can support devices such as USB ash disks, or oppy disks

with FAT 32/16 format and single partition only.

• Do not shut down or reset the system while updating the BIOS to prevent

system boot failure!

1 ... 72 73 74 ... 162

No comments

Asus M3N WS - Motherboard - ATX Specifications Page 73