Asus P I-P55TVP4 User Manual download pdf (Page 31)

ASUS P/I-P55T2P4 User’s Manual 25

Power Connection Procedures

1. After all jumpers and connections are made, close the system case cover.

2. Make sure that all switches are in the off position as marked by

3. Connect the power supply cord into the power supply located on the back of

your system case as instructed by your system user's manual.

4. Connect all power cords into a power strip that is equipped by a surge protector.

5. You may then turn on your devices in the following order:

a. Your monitor

b. External SCSI devices (starting with the last device on the chain)

c. Your system power

6. The power LED on the front panel of the system case will light and the monitor

LED as well. The system will then run power-on tests. While the tests are

running, additional messages will appear on the screen. If you do not see any-

thing within 30 seconds from the time you turn on the power, the system may

have failed a power-on test. Recheck your jumper settings and connections or

call your authorized dealer for assistance.

7. During power-on, hold down the <Delete> key to enter BIOS setup. Follow the

next section "BIOS SOFTWARE" for instructions.

III. INSTALLATION

(Power Connections)

III. INSTALLATION

1 ... 30 31 32 ... 64

No comments

Asus P I-P55TVP4 User Manual Page 31