Asus P/I-XP55TVP4 User Manual download pdf (Page 23)

ASUS P/I-XP55TVP4 User’s Manual 17

III. INSTALLATION

(DMA Channels)

III. INSTALLATION

You may use Microsoft's Diagnostic (MSD.EXE) utility included in the Windows

directory to see a map of your used and free IRQs. For Windows 95 users, the

"Control Panel" icon in "My Computer," contains a "System" icon which gives you

a "Device Manager" tab. Double clicking on a specific device give you "Resources"

tab which shows the Interrupt number and address. Make sure that no two devices

use the same IRQs or your computer will experience problems when those two de-

vices are in use at the same time.

To simplify this process this motherboard has complied with the Plug and Play (PNP)

specification which was developed to allow automatic system configuration when-

ever a PNP-compliant card is added to the system. For PNP cards, IRQs are as-

signed automatically from those available.

If the system has both Legacy and PNP ISA cards installed, IRQs are

assigned to PNP cards from those not used by Legacy cards. The PCI and PNP

configuration of the BIOS setup utility can be used to indicate which IRQs are being

used by Legacy cards. For older Legacy cards that does not work with the BIOS,

you can contact your vendor for an ISA Configuration Utility.

An IRQ number is automatically assigned to PCI expansion cards after those used

by Legacy and PNP ISA cards. In the PCI bus design, the BIOS automatically

assigns an IRQ to a PCI slot that has a card in it that requires an IRQ. To install a

PCI card, you need to set something called the INT (interrupt) assignment. Since all

the PCI slots on this motherboard use an INTA #, be sure that the jumpers on your

PCI cards are set to INT A.

Assigning DMA Channels for ISA Cards

Some ISA cards, both Legacy and PNP may also need to use a DMA (Direct Memory

Access) channel. DMA assignments for this motherboard are handled the same way

as the IRQ assignment process described above. You can select a DMA channel in

the PCI and PNP configuration section of the BIOS Setup utility.

IMPORTANT: Choose "Yes" for those IRQ's and DMA's you wish to reserve

for Legacy (Non-PnP) ISA expansion cards in “IRQ xx Used By ISA” and “DMA

x Used By ISA” of the PNP and PCI Setup in the BIOS SOFTWARE section,

otherwise conflicts may occur.

1 ... 22 23 24 ... 64

No comments

Asus P/I-XP55TVP4 User Manual Page 23