Asus P/I-XP55TVP4 User Manual download pdf (Page 62)

56 ASUS P/I-XP55TVP4 User's Manual

Decide whether or not you need to terminate the ASUS PCI-SC200 based on its

position in the SCSI chain. Only the devices at each end of the chain need to be

terminated. If you have only internal or only external devices connected to the

ASUS PCI-SC200, then you must terminate the ASUS PCI-SC200. If you have

both internal and external devices connected, you must not terminate the card. See

the following example which illustrates this concept.

SCSI Device 1

SCSI Device 2

Termination Required

(End Device)

Termination Required

(JP5 Open)

Termination Required

(End Device)

SCSI Device 3

SCSI Device 4

SCSI Device 2

SCSI Device 1

Termination Required

(End Device)

No Termination Required

(JP5 Short)

SCSI ID Numbers

All SCSI devices, including the ASUS PCI-SC200 interface card must have a SCSI

identification number that is not in use by any other SCSI device. There are eight

possible ID numbers, 0 through 7. The ASUS PCI-SC200 has a fixed SCSI ID of 7.

You can connect up to seven SCSI devices to the interface card. You must set a SCSI

ID number for each device. SCSI devices vary in how they set the ID number. Some

use jumpers, others have some kind of selector switch. Refer to the manual for any

device you install for details on how to set its ID number.

VI. ASUS PCI-SC200

(SCSI ID Numbers)

VI. ASUS PCI-SC200 SCSI Card

1 ... 61 62 63 64

No comments

Asus P/I-XP55TVP4 User Manual Page 62