Asus P4P800S-X User's Guide download pdf (Page 50)

2-16

Chapter 2: BIOS information

When you set the AI Overclocking Tuner item to [Manual], the related

overclocking items appear.

CPU Frequency (MHz) [XXX] (value is auto-detected)

Indicates the frequency sent by the clock generator to the system bus and PCI

bus. The bus frequency (external frequency) multiplied by the bus multiple equals

the CPU speed. The value of this item is auto-detected by BIOS and is not

manually configurable. The values range from 100 to 400. Refer to the following

table for the correct Front Side Bus and CPU External Frequency settings.

Front Side Bus CPU External Frequency

FSB 800 200 MHz

FSB 533 133 MHz

FSB 400 100 MHz

Table 2.4.1 FSB/CPU External Frequency Synchronization

Refer to the CPU documentation before setting the CPU VCore voltage. A very

high Vcore voltage may severely damage the CPU!

CPU VCore Voltage [Auto]

Allows you to select a specific CPU VCore voltage. The configurations depends on

the type of CPU installed.

Configure System Frequency/Voltage

AI Overclock Tuner [Manual]

CPU Frequency [133]

DRAM Frequency [Auto]

AGP/PCI Frequency [Auto]

CPU VCore Voltage [Auto]

DDR Reference Voltage [Auto]

DRAM Frequency [Auto]

Allows you to set the DDR operating frequency depending on the CPU installed.

Configuration options: FSB 400 CPU: [266 MHz] [Auto], FSB 533 CPU: [333 MHz]

[266 MHz] [Auto], FSB 800 CPU: [400 MHz] [320 MHz] [266 MHz] [Auto]

AGP/PCI Frequency (MHz) [Auto]

Allows you to adjust to a higher AGP/PCI frequency for better system performance

and overclocking capability. Configuration options: [Auto] [66.6/33.3]

[75.0/37.5] [85.7/42.8]

Selecting a very high AGP/PCI frequency may cause the system to become

unstable! If this happens, revert to the default setting.

1 ... 49 50 51 ... 70

No comments

Asus P4P800S-X User's Guide Page 50