Asus P7Q57-M DO/CSM Specifications download pdf (Page 35)

ASUS P7Q57-M DO 2-5

4. Select Yes and press <Enter>. When BIOS update is done, press <ESC> to exit BIOS

Updater. Restart your computer.

DO NOT shut down or reset the system while updating the BIOS to prevent system boot

failure!

• For BIOS Updater version 1.04 or later, the utility automatically exits to the DOS prompt

after updating BIOS.

• Ensure to load the BIOS default settings to ensure system compatibility and stability.

Select the Load Setup Defaults item under the Exit BIOS menu. See section 2.9 Exit

menu for details.

• Ensure to connect all SATA hard disk drives after updating the BIOS le if you have

disconnected them.

Updating the BIOS le

To update the BIOS le using BIOS Updater

1. At the FreeDOS prompt, type bupdater /pc /g and press <Enter>.

ASUSTek BIOS Updater for DOS V1.00b [09/06/22]

Current ROM

Update ROM

Note

[Enter] Select or Load [Tab] Switch [V] Drive Info

[Up/Down/Home/End] Move [B] Backup [Esc] Exit

P7P55M.ROM 2097152 2009-09-23

17:30:48

FLASH TYPE: MXIC 25L1605A

PATH: A:\

BOARD: P7Q57-M DO

VER: 0205

DATE: 09/21/2009

BOARD: Unknown

VER: Unknown

DATE: Unknown

D:\>bupdater /pc /g

2. The BIOS Updater screen appears as below.

3. Press <Tab> to switch between screen elds and use the <Up/Down/Home/End> keys

to select the BIOS le and press <Enter>. BIOS Updater checks the selected BIOS le

and prompts you to conrm BIOS update.

Are you sure to update BIOS?

Yes No

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 55 56

No comments

Asus P7Q57-M DO/CSM Specifications Page 35