Asus TX97 User Manual download pdf (Page 43)

ASUS TX97-E User’s Manual 43

C8000 - CBFFF Shadow to DC000 - DFFFF Shadow (Disabled)

These fields are used for shadowing other expansion card ROMs. If you install other

expansion cards with ROMs on them, you will need to know which addresses the

ROMs use to shadow them specifically. Shadowing a ROM reduces the memory

available between 640KB and 1024KB by the amount used for this purpose.

......................................................................................................................................

Boot Up NumLock Status (On)

This field enables users to activate the Number Lock function upon system boot.

Typematic Rate Setting (Disabled)

When enabled, you can set the two typematic controls listed below. Default setting

is Disabled.

Typematic Rate (Chars/Sec) (6)

This field controls the speed at which the system registers repeated keystrokes. Op-

tions range from 6 to 30 characters per second. Setup default setting is 6; other

settings are 8, 10, 12, 15, 20, 24, and 30.

Typematic Delay (Msec) (250)

This field sets the time interval for displaying the first and second characters. Four

delay rate options are available: 250, 500, 750, and 1000.

Chipset Features Setup

This “Chipset Features Setup” option controls the configuration of the board’s chipset.

Control keys for this screen are the same as in the BIOS Features Setup screen.

NOTE: SETUP Defaults are noted in parenthesis next to each function heading.

Details of Chipset Features Setup

Auto Configuration (60ns DRAM)

The default setting of 60ns DRAM sets the optimal timings for items 2 through 9 for

60ns DRAM modules. If you are using 70ns DRAM modules, you must change this

item to 70ns DRAM. See section III for DRAM installation information.

IV. BIOS SOFTWARE

IV. BIOS

(Chipset Features)

1 ... 42 43 44 ... 64

No comments

Asus TX97 User Manual Page 43